CyberQ Cloud Temperature Controller
Main Screen
|
System Setup
|
Control Setup
|
WIFI Setup
WIFI Setup
Reset In
Hotspot
Infra
*
Fixed Hotspot Settings
Connection Name
Device SSID
*
Device Password
*
Encryption
Open
WEP40
WEP104
WEP Auto
*
Show Advanced Hotspot Settings +
Static IP Address
Changing this value may result in incorrect operation.
*
Static Gateway Address
Changing this value may result in incorrect operation.
*
Static Netmask Address
Changing this value may result in incorrect operation.
*
Static DNS Address
Changing this value may result in incorrect operation.
*
Infrastructure Settings
Connection Name
SSID
Perform WIFI Scan
*
Key
*
Cloud Enabled
Off
On
*
This is only used in Infrastructure mode. Enables connection to ShareMyCook.com.
Show Advanced Infrastructure Settings +
Encryption
WPA
WPA, Phrase
WPA2
WPA2, Phrase
WPA Auto
WPA Auto, Phrase
*
Static IP Address
This value is required in infrastructure mode when DHCP is turned off.
*
Static Gateway Address
This value is required in infrastructure mode when DHCP is turned off.
*
Static Netmask Address
This value is required in infrastructure mode when DHCP is turned off.
*
Static DNS Address
This value is required in infrastructure mode when DHCP is turned off.
*
DHCP Client
Off
On
This is only used in Infrastructure mode. When in Ad Hoc mode or Hot Spot, device will act as a DHCP Server and DNS Server.
*
HTTP Username
HTTP Password
Set either username or password to blank to disable password protection.
HTTP Port
*
* These parameters require a power-cycle.
MAC Address
00:1E:C0:4A:37:B1
FW Version
4.08, 2.49.12